Concrete pumping is an essential aspect of your commercial build process. Typically, manual concrete preparation is ineffective when pouring massive volumes of concrete. In most cases, the concrete could cure unevenly, which leads to inconsistent strength between the different sections and layers. Once this happens, the concrete could chip or crack. Concrete pumping helps prevent this since the concrete can be poured, screeded and vibrated within record time. Below is a piece with some tips about commercial concrete pumping.

Site Preparation 

The contractor must conduct a preliminary assessment to establish how best to execute the concrete pumping works. For instance, they should visit the site to assess whether it is accessible to the truck ferrying the pump. The professional also decides what type of pump to use at this stage. For instance, line pumps are suited for small commercial projects such as reinforcing foundations or renovation work. However, the contractor could opt for a boom pump for massive projects where they need to pump substantial volumes of concrete every hour. The site inspection also helps the contractor identify site risks. For instance, low-hanging electrical wires pose a threat to the boom. If they exist, the contractor could negotiate with the local power company to have the cables moved or disconnected as they work. The professional should also consider a weather forecast to establish the working conditions when pouring the concrete. For instance, heavy rains could prevent the trucks from accessing the site. If this is the case, the contractor could opt for a long boom. 

Safety At The Site 

To promote safety, the contractor should consider a traffic management plan. It is especially so if numerous cement trucks will visit the site. The professional should install safety signage and barriers to prevent unauthorized personnel from accessing the site. Wet concrete could cause irritation or injuries. Consequently, all personnel should wear protective clothing. The contractor should conduct regular assessments to establish prevailing risks. For instance, windy conditions could complicate the concrete pumping process. As a rule, the truck and concrete pump should be inspected before the concrete pumping work. For instance, the truck should undergo intense mechanical inspections to ensure they do not have defects that could lead to accidents. The contractor must make sure the truck has adequate supplies such as fuel and lubricant. After all, mechanical defects could cause the concrete to cure in transit. The concrete pump and boom should be serviced before pumping. Moreover, they should undergo hourly inspections at the site. 

Share